Skip to main content

STILL RX60 electric forklift, 2.5 to 3.5 t

The RX60 2.5-3.5 t is STILL's 80-volt electric counterbalance forklift for 2,500 to 3,500 kg loads. We sell it new and used, hire it and service it.

The RX60 in its 2.5 to 3.5 tonne sizes is STILL’s 80-volt electric counterbalance forklift for work that would otherwise go to a diesel or gas truck. The RX 60-25, 60-30 and 60-35 are rated for 2,500, 3,000 and 3,500 kg at a 500 mm load centre. STILL rates the lift to 7,390 mm and the travel speed to 20 km/h.

13used machines in stock now
6new specifications listed to order
£105a week to hire, from (ex VAT)
2.5 - 3.5 trated capacity across the range

How the RX60 models differ

The number after the dash is the capacity in hundreds of kilograms. On STILL’s current data sheet:

  • /600: rated at a 600 mm load centre instead of 500 mm, for longer loads.
  • L: the larger battery compartment, 700 Ah against 560 Ah on STILL’s data sheet.
  • Plus: STILL’s high-performance version, with stronger drive and lift motors.

STILL sells heavier RX60s (3.5 to 5.0 t and 6.0 to 8.0 t) as separate ranges; they are not on this page. Used trucks from the previous generation are often listed in tonnes, so an “RX60 2.5” is a 2,500 kg machine.

Buying a used RX60

Each used RX60 on this page is one specific truck, with its own year, mast, lift height and battery, and a photo of that machine. On an 80-volt truck the battery is a large part of the value, so ask us about its age and condition alongside the year. Every used machine comes with a current thorough examination certificate, and finance is available on used as well as new.

Hiring an RX60

We hire from a day, with a minimum charge of one week at the weekly rate. The rates on this page are ex VAT. If a hired machine stops working you get your money back and we send an engineer to fix it.

Servicing, inspection and training

Acclaim has sold and serviced STILL trucks since 1982 and is an exclusive STILL dealer. Our own engineers service the RX60 from eight UK depots, whoever supplied it, and carry out LOLER thorough examinations. Operators need counterbalance training, which we run.

Tell us the load, the lift height and the site, and we will say which RX60 fits, new, used or on hire.

RX60 in stock now

Used

Each of these is a specific machine with its own year, mast and battery. Compare them here, then open one for its photos and full specification.

MachineYearCapacityLift heightMastPowerHire from
Used RX60 2.5 A834720172,500 kg4,890 mmTripleElectric 80 V£105/wk
Used RX60 2.5 A799320152,500 kg7,780 mmDuplexElectric 80 V£105/wk
Used RX60 3.5 A971620143,500 kg3,600 mmDuplexElectricCall
Used RX60 3.0 A794520143,000 kg3,670 mmTelescopicElectric 80 V£105/wk
Used RX60 3.0 A794320143,000 kg3,670 mmTelescopicElectric 80 V£105/wk
Used RX60 3.0 A794120143,000 kg3,670 mmTelescopicElectric 80 V£105/wk
Used RX60 3.0 A794020143,000 kg3,670 mmTelescopicElectric 80 V£105/wk
Used RX60 3.0 A793920143,000 kg3,670 mmTelescopicElectric 80 V£105/wk
Used RX60 3.0 A793820143,000 kg3,670 mmTelescopicElectric 80 V£105/wk
Used RX60 2.5 A770820132,500 kg5,180 mmTelescopicElectric 80 V£105/wk
Used RX60 2.5 A761220132,500 kg5,165 mmTelescopicElectric 80 V£105/wk
Used RX60 2.5 A674020102,500 kg4,700 mmTripleElectric 80 V£105/wk
Used RX60 2.5 A790720082,500 kg4,545 mmTripleElectricCall

New, to order

These are the configurations listed for order or hire new. They differ by capacity, mast and lift height; the full build is confirmed at quotation.

MachineYearCapacityLift heightMastPowerHire from
New RX 60-25 Z0539New2,500 kg2,870 mm2-Stage Limited Free LiftElectric£130/wk
New RX 60-25 Z0538New2,500 kg5,190 mm2-Stage Full Free LiftElectric£130/wk
New RX 60-25 Z0014New2,500 kg7,540 mmTriplex Full Free LiftElectric£130/wk
New RX 60-35 Z0541New3,500 kg2,870 mm2-Stage Limited Free LiftElectric£150/wk
New RX 60-35 Z0540New3,500 kg5,190 mm2-Stage Full Free LiftElectric£150/wk
New RX 60-35 Z0015New3,500 kg7,540 mmTriplex Full Free LiftElectric£150/wk

STILL's published figures

Truck typeElectric counterbalance forklift, seated
ModelsRX 60-25, 60-25L, 60-30, 60-30L, 60-35L; /600 and Plus versions
Rated capacity2,500 - 3,500 kg
Load centre500 mm (/600 versions: 600 mm)
Battery voltage80 V; lithium-ion available
Rated lift, top of range7,390 mm
Travel speed20 km/h

Source: STILL UK, RX 60 2.5 - 3.5 t product page; STILL RX 60-25/35 technical data sheet (VDI 2198). Figures are the manufacturer's for a new machine; a used machine's own figures are on its page.

Questions about the RX60

The 2.5 to 3.5 tonne RX60 runs on 80 volts.

The capacity is rated at a 600 mm load centre instead of 500 mm, for longer loads.

Yes. We hire from a day; the minimum charge is one week at the weekly rate. If a hired machine stops working you get your money back and we send an engineer out to fix it.

Yes, always. Every used machine is supplied with a current thorough examination certificate as standard.

Yes. Our own engineers work out of eight UK depots and service machines whoever supplied them.

Yes. Every price on this site is ex VAT. Delivery is nationwide and charged separately, depending on where the machine is going.

Need help? Speak to one of our experts